GY-9255 MPU9255 Sensor Module

Description

MPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module features the MPU-9250, which is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis gyroscope and the 3-Axis accelerometer. The other die houses the AK8963 3-Axis magnetometer. Hence, the MPU-9250 is a 9-axis Motion Tracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer, and a Digital Motion Processor (DMP). It is based on I2C Address, Address: 0x68 by default, 0x69 if AD0 is pulled high.
The MPU-9250 also features an embedded temperature sensor. This module includes pull-up resistors on the SDA, SCL, and nCS lines, pull-down resistors on the FSYNC and AD0 lines, and an on-board 3.3V voltage regulator allowing you to power the module from 5V sources such as an Arduino. If you desire to power the module from 3.3V you can bridge the solder jumper next to the voltage regulator to bypass the regulator. Featured By htebd.
Product Images are shown for illustrative purposes only and may differ from the actual product.
htebd htebd htebd htebd htebd htebd htebd htebd htebd htebd 

Applications
FPV, RC and Robots systems
GPS navigation systems
Impact recognition and logging
Gaming and virtual reality input devices
Motion-activated functions
Intelligent power saving for handheld devices
Vibration monitoring and compensation
Free-fall detection
We also have a module with same driver chips but including an extra BMP180(Barometer) driver chip so offering 10 degrees of freedom, Click here
htebd htebd htebd htebd htebd htebd htebd htebd htebd htebd 

Features :

Acceleration, Gyroscope, and Magnetometer
9 DOF module
Build-in ultra-low noise linear LDO voltage regulator.
Built-in onboard filters, which reduce noise from the motor and other high current electronics.
All sensors connected to the I2C bus.
Build-in the Logic level converter for I2C.
Power indicator LED.
Using Immersion Gold PCB, machine welding process to ensure quality.
On-board pull-up resistors on SDA, SCL, and nCS
On-board pull-down resistors on FSYNC and AD0
htebd htebd htebd htebd htebd htebd htebd htebd htebd htebd 
General Specification
Power Supply
4.4 to 6.5 V or 3.3V (if you solder the solder jumper near the on-board voltage regulator)
Gyro Range
± 250 500 1000 2000 ° / s
Acceleration Range
± 2 ± 4 ± 8 ± 16g
Magnetic Field Range
± 4800uT
Degree of Freedom (DOF)
9
Interface
I2C
Length (mm)
26
Width (mm)
15
Height (mm)
3
Weight (gm)
2
Shipment Weight
0.005 kg
Shipment Dimensions
6 × 8 × 2 cm
Please allow 5% measuring deviation due to manual measurement.
htebd htebd htebd htebd htebd htebd htebd htebd htebd htebd 
Package Includes :
1 x GY-9255 MPU9255 Sensor Module
1 x Jumper Header(Unsoldered).