NEO-M8N GPS Module with Ceramic Active Antenna

Description

The APM2.5 NEO-M8N GPS Module GYGPSV1-8M is optimized for cost-sensitive applications, while NEO-M8N/M8Q provides the best performance and easier RF integration. The NEO-M8N offers high performance also at low power consumption levels. The futureproof NEO-M8N includes an internal Flash that allows future firmware updates. This makes NEO-M8N perfectly suited to industrial and automotive applications. htebd
The NEO-M8 series of concurrent GNSS modules are built on the high performing M8 GNSS engine in the industry proven NEO form factor.NEO-M8N provides the best performance and easier RF integration. The NEO-M8N offers high performance also at low power consumption levels. The future-proof NEOM8N includes an internal Flash that allows future firmware updates. This makes NEO-M8N perfectly suited to industrial and automotive applications. htebd
Note: It is a manual measurement, there may be 2-3 mm error. And item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
The GY-NEO-8M module is an advanced GPS module based on uBlox m8N that supports UART communication protocol with active antenna. You can interface this module easily with a microcontroller. This module has a rechargeable battery and can also be connected directly to a computer using a USB to TTL converter
The on-board LED starts blinking when module is connecting to GPS satellites.

Features :
The ceramic antenna provides a very strong signal
With LED indicator lamp
The default baud rate: 9600.
With data backup battery.
LED signal indicator.
Compatible with various flight controller module.
EEPROM save the configuration parameter data when power-down.

Assistance AssistNow GNSS Online

AssistNow GNSS Offline (up to 35 days)

AssistNow Autonomous (up to 6 days)

OMA SUPL & 3GPP compliant

Oscillator TCXO

Built-in RTC crystal

Anti-jamming Active CW detection and removal.

Extra onboard SAW bandpass filter

Memory Flash

Supported antennas Active and passive

Odometer Travelled distance

Data-logger For position, velocity, and time

General Specification
Model
Ublox NEO-M8N
Receiver Type
72-channel Ublox M8 engine.
Input Supply Voltage (VDC)
3 ~ 5
Main Chip
Ublox NEO-M8N
Sensitivity (dBm)
156
Cold Start (without aiding): -147 dBm
Position Accuracy (Meter)
2
2.5
Acceleration (g)
<4
Navigation Update Rate
up to 18 HZ.
Operating Temperature Range (°C)
-45 to 105
Tracking Sensitivity (dBm)
-161 dBm
Co-Ordinate System
WGS-84
Capture Time
0.1s Average
Avg Cold Start Time (s)
30
Warm Start Time (s)
1
Boot Time
1S
Maximum Altitude (m)
18000
Dimensions (mm) LxWxH
Antenna: 26 x 26 x 9
Module: 26 x 36 x 4
Weight (gm)
17
Shipment Weight
0.06 kg
Shipment Dimensions
9 × 8 × 3 cm

Documentation:
Interfacing NEO-8M GPS Module with Arduino
Package Includes :
1 x APM 2.5 NEO M8N GPS Module.
1 x Ceramic Active Antenna.